What Is IP Index? Learn The IP Standards Of Led Lights

What is IP index? Is this indicator important? Normally, electronic devices such as electric light bulbs, surveillance cameras, clocks, etc. can be installed in many locations and in many different living environments. They often face harsh weather conditions such as rain, wind or hot sun. However, they have a very long life and rarely have problems with damage or stoppage, except for products that are too old.

To ensure this, manufacturers before putting their products on the market must go through rigorous testing processes by an organization in a certain booth. This whole process must rely on a pre-assigned index for the product, which is the ip index. So What is ip index? or specifically what are the ip standards of LEDs? will be Sumosolar Answer in this post.

You are watching: What is IP23?

1. What is ip index?

The ip index (short for Ingress Protection) is simply understood as an indicator of the device's ability to protect itself in environments that can resist dust and water ingress. Depending on the 2 numbers behind the ip index, it is possible to know whether the product has low or high durability.

What Is IP Index?

2. What is the ip index of the Led light?

Similar to other devices, the ip index of the Led light is also used to determine how much its dust and water resistance is. At the same time, it helps users to distinguish whether the LED light is of good quality and safe.

3. What is ip standard? Definition of commonly encountered standards

As issued by the International Electrotechnical Commission, the IP standard is a general set of rules used to classify and rank the levels of protection of equipment from external influences. This standard includes alphanumeric characters, each of which has a different meaning.

Reference: What is a House Bill? What is Master Bill? Distinguishing House Bill And Master Bill

At the same time, below Sumosolar will share with everyone the meaning of the most commonly encountered standards.

IP21: This index specifies product protection against solid objects > 12.5mm in size at level 2 and level 1 water resistance. Protection of objects from light rain weather, dripping water vertically in 10 minutes time.

IP40: This standard is quite appreciated because it can protect objects from most wires, screws or similar objects that are less than 1mm in size. However, the underwater protection is zero.

IP43: Similarly, ip43 will have the same dustproof standard as ip40, but its resistance to water or immersion is much higher, at level 3 has the effect of protecting objects when directly sprayed with water.

IP54: This ip index has quite high standards of protection, dust and water resistance, most external factors do not affect the performance of the object, so it is often chosen and trusted by customers. .

IP55: Like the ip54 standard, devices with this rating have good durability, outstanding water resistance. In particular, ip55 can also withstand high pressure nozzles from different directions.

IP65: Led light IP65 waterproof standard means that the led light is completely dustproof, along with resistant to high pressure water jets from different directions.

Standard ip level for each type of LED

In fact, the ip index of LED lights is often not the same and is divided into many types, specifically:

What Is IP Index?

4.1. Led Street Lights

This type of light is often installed on traffic routes, subject to the direct impact of fluctuations from the environment. At the same time, in order to ensure the safety of pedestrians, LED street lights must be of good quality, avoid damage and ensure a long life.

Currently, most street lights have high IP standards, ranging from ip65 - ip66 with direct protection against harmful dust and against strong water spray from many directions.

4.2. Led Headlight

Hot: Review of 5 high-quality Aesop facial and body care products from Australia

LED headlights are used quite a lot and in many different cases, so their IP standards are also classified separately. For lamps used outdoors, they must meet IP standards from ip66 or higher to ensure durability and illumination for a long time.

In contrast, for Led headlights installed in the house, they usually do not have to bear too much impact from the outside environment, so it is only necessary to choose lamps with IP standards from ip55 - ip56.

4.3. Underfloor Led Lights

Underfloor LED lights are often installed in locations outside the garden, often in direct contact with the ground, where there is high humidity. Therefore, these lights must be guaranteed both dustproof as well as absolute waterproof with an ip67 level or higher.

4.4. Factory Led Lights

LED lights installed in factories are not often exposed to dust or moisture. However, if you do not want to spend time on maintenance or costly to replace and install. Everyone should choose a lamp with an average ip standard from ip40 - ip55 is the most suitable.

5. Conclusion:

So Sumosolar I have just answered all the information about What is ip index? What is IP standard? and IP standards suitable for each type of led. Through this article, we hope everyone knows how to choose for themselves beautiful and durable LED lights for different locations.

In addition, if you are intending to buy LED lights but still do not know which type to choose, do not hesitate to contact us immediately for free advice and answers.

Information about the store address and how to contact to purchase:

Related Content: Triple test – A test that helps assess the risk of a baby having Down Edward's syndrome or neural tube defects in the second trimester of pregnancy