Install SSL on HAProxy - Technical Support Center - Insurance Finances

Luong The Nam


06/07/2022

HAProxy is a suitable service for very high-traffic websites and is therefore often used to improve web service reliability and performance for multi-server configurations.

To install SSL on HAProxy, please refer to the instructions below: (note: the file locations may vary according to the settings on your server)

1. Prepare SSL certificate file

• You will get the file private key When SSL activation is sent to your email, usually the file format will be: www_domain_.key

• When you download the SSL certificate file that has completed the authentication, you will receive the following files, you will use 2 files as shown in the image below:

Next, you put in 3 files www_domain.key, www_domain.pem, Chain_RootCA_Bundle.crt Go to the server and type the following command to create the file pem used to install HAProxy.

cat www_tên_miền.pem Chain_RootCA_Bundle.crt www_tên_miền.key > certificate.pem

2. Check if HAProxy has SSL support

Please run the following command to check the version HAProxy:

haproxy -vv

If the returned result has the following information, it means HAProxy SSL supported:

HA-Proxy version 1.6.3 2015/12/25
[...]
Built with OpenSSL version : OpenSSL 1.0.1e 11 Feb 2013
Running on OpenSSL version : OpenSSL 1.0.1e 11 Feb 2013
OpenSSL library supports TLS extensions : yes
OpenSSL library supports SNI : yes
OpenSSL library supports prefer-server-ciphers : yes

Otherwise, if you see the following output, then you need to rebuild HAProxy with SSL support.

HA-Proxy version 1.6.3 2015/12/25
[...]
Built with OpenSSL version : not set

3. Configure SSL for HAProxy

Open HAProxy configuration file /etc/haproxy/haproxy.cfg and re-edit: (Note the path may be different from your server)

frontend http_front
   bind *:80
   stats uri /haproxy?stats
   default_backend http_back

frontend https_front
   bind *:443 ssl crt /etc/ssl/certificate.pem #Đường dẫn tới tập tin pem đã tạo ở bước 1.
   reqadd X-Forwarded-Proto: https

backend http_back
   balance roundrobin
   server Server1 <private IP>:80 check
   server Server2 <private IP>:80 check

After the configuration is complete, run the following command to check the configuration file:

haproxy -check -f /etc/haproxy/haproxy.cfg

After successful configuration test, please restart HAProxy for the configuration to take effect.

service haproxy restart

Note: This is just a reference for installing SSL on HAProxy, the settings may be different from yours, please check and replace to avoid errors.

Good luck!

---

Turn a bug into a feature to exploit it!!!

Why Should You Choose .ONLINE Domain Extensions

Related Posts