Common SMT electronic components specifications

PCBA processing IC components are mainly divided into two types: DIP and SMD, DIP plug-in IC, and SMD (Surface Mount Device) surface mount components.

You are viewing: What is 0603?

So, what is SMD 0603, 0805, 1206?

It refers to the package size of the component and the size is length x width. The units used can be inches or millimeters. In general, the resistance and capacitance of an SMD are both used to describe the dimensions of components. A total of 4 digits indicates a set of 2 digits.

0603: 0.06"x0.03" or 60x30 mils or 1.6x0.8mm (Note: 1mil = one thousandth of an inch)

0805: 0.08"x0.05" or 80x50 mils or 2.0x1.25mm

1206: 0.12"x0.06" or 120×60 mils or 3.2×1.6mm

See also: 8 ways to express 'heart' in English

Dimensions and unit relations:

Package Dimensions, length × width Typical resistor rated power (W) Comments Figures Emperor 0377102962 ,4 mm x 0.2 mm 0.0157 in × 0.0079 in 0.031 [9] 0377102962 2.6 mm × 0.3 mm 0.024 in × 0.012 in 0.05 [9] 1005 0402 1.0 mm × 0.5 mm 0.039 in × 0.020 in 0.1, [9] or 0.062 [10] 1608 0603 1.6 mm × 0.8 mm 0.063 in × 0.031 in 0.1 [9] 2012 0805 2.0 mm × 1.25 mm 0.079 in × 0.049 in 0.125 [9] 2520 1008 2.5 mm x 2.0 mm 0.098 in × 0.079 in Typical inductor and ferrite core [11] 3216 1206 3.2 mm × 1.6 mm 0.126 in × 0.063 in 0.25 [9] 3225 1210 3.2 mm × 2.5 mm 0.26 in × 0.098 in 0.5 [9] 4516 1806 4.5 mm x 1.6 mm 0.177 × × 0.063 in [12] 4532 1812 4.5 mm × 3.2 mm 0.18 in × 0.13 in 0.75 [9] 4564 1825 4.5 mm × 6.4 mm 0.18 in × 0.25 in 0.75 [9] 5025 2010 5.0 mm × 2.5 mm 0.197 in × 0.098 in 0.75 [9] 6332 2512 6.3 mm × 3.2 mm 0.25 in × 0.13 in 1 [9] 2920 7.4 mm x 5.1 mm 0.29 in × 0.20 in [13]

Capacitor Specification

There are different types of capacitors, mainly made up of different materials, such as ceramic capacitors, tantalum capacitors, electrolytic capacitors, etc. 0.1uF and above are considered large capacitance values. Large capacitor with anode and cathode (identifying capacitor)

In terms of SMD capacitors, unlike resistors, it can only be seen from the specs on the tape.

In principle, however, from the mass of the SMD capacitive element, the larger the mass, the larger the capacitance value.

The on-band specification will see a similar value for 104.103, the size of its table capacitance value. 104, same as shown above, 10x 10 4th power pF => 100000 pF = 100nF = 0.1uF. Similarly, 330 is expressed as 33pF.

Hot: What is the RSI? Application of RSI in stock investment

Other SMD Components

Transistor for SMD, SOT (Small Outline Transistor), such as SOT-23

For SMD's IC, SOIC (Small Outline IC), such as SOIC-8, SOIC-16

The details of the IC, the different encapsulation technologies will be derived (that is, the Die's packages will be different), eg.

TQFP (Thin Flat Pack 4) 100 or 144 pins。

PQFP (Plastic Quad Flat Package) 208 or 240 pins。

BGA (Ball Grid Array) 256 to 1000 + pins。

Reference: What do the new emotions on Facebook mean?